Items Iltirta

Do you want to take a photo with the camera or select an existing image?

(en) The Iberian settlement of Iltirta was located in the territory of the Ilergetes people, close to the Pyrenees and circa 75km north of Colonia Tarraco (modern-day Taragona). A battle between Julius Caesar and his adversary Pompey took place here in 49 BC and the city later became the Roman Municipium of Ilerda. The first coinage series of Iltirta consisted of Emporitan imitation drachms with the inscription ILTIRTAR, ILTIRTASALIR, or ILTIRTASALIRUSTIN and Massalian imitation divisional coinage, with the inscription ILTIRTAR. The mint of Iltirta continued striking monetary issues under Roman domination using the Iberian inscription ILTIRTA, whose first issue was a bronze coin showing a wolf and using the same metrology as used in Kese. This early coinage is followed by two parallel issues: one showing a horseman with the Roman metrological system and the other one showing the wolf, which follows the Tarraco–Kese system. The silver that would finance the Roman penetration to the inner territories is partly struck at Iltirta following the Roman denarius standard. Later on, during the 2nd century BC, only horseman-type coinage was struck. During the Sertorian wars (80–70 BC), monetary issues revert to the Kesean influence by adopting the wolf-type pieces and Kesean metrology. This last series is crude and low-weighed and may be considered an imitation. (source: Leandre Villaronga, Jaume Benages; 2011. "Ancient Coinage of the Iberian Peninsula". Societat Catalana d'Estudis Numismàtics, Institut d'Estudis Catalans, Barcelona, Spain.)

External links: Wikidata (Q108842690)

Iltirta: Swap
Display options52 results found.
Order by: face value - ruling authority - type - date - reference
Results per page: 10 - 20 - 50 - 100 - 200

Unit (late 3rd century BC)

Drachm – obverse
Drachm – reverse
Drachm
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 4.5 g • ⌀ 19.0 mm
ACIP# 343, CNH# 41/32, N# 575132
Drachm – obverse
Drachm – reverse
Drachm
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 4.6 g • ⌀ 19.0 mm
ACIP# 345, CNH# 41/33, N# 575133
Drachm – obverse
Drachm – reverse
Drachm
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 4.6 g • ⌀ 18.2 mm
ACIP# 346, CNH# 41/34, N# 575134
Drachm – obverse
Drachm – reverse
Drachm
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 4.6 g • ⌀ 18.9 mm
ACIP# 348, CNH# –, N# 575125
Drachm – obverse
Drachm – reverse
Drachm
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 4.4 g • ⌀ 18.0 mm
ACIP# 349, CNH# 42/38, N# 575136
Drachm – obverse
Drachm – reverse
Drachm
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 4.8 g • ⌀ 19.0 mm
ACIP# 350, CNH# 42/37A, N# 575137
Drachm – obverse
Drachm – reverse
Drachm
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 4.1 g • ⌀ 18.5 mm
ACIP# 351, CNH# 42/39, N# 575138
Tritartemorion – obverse
Tritartemorion – reverse
Tritartemorion
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 0.8 g • ⌀ 9.1 mm
ACIP# 453, CNH# 43/43A, N# 575139
Tritartemorion – obverse
Tritartemorion – reverse
Tritartemorion
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 0.6 g • ⌀ 9.8 mm
ACIP# 455, CNH# –, N# 575140
Tritartemorion – obverse
Tritartemorion – reverse
Tritartemorion
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 0.5 g • ⌀ 10.1 mm
ACIP# 456, CNH# 44/50A, N# 575141
Tritartemorion – obverse
Tritartemorion – reverse
Tritartemorion
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 0.5 g • ⌀ 9.4 mm
ACIP# 459, CNH# 43/45, N# 575114
Tritartemorion – obverse
Tritartemorion – reverse
Tritartemorion
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 0.5 g • ⌀ 9.5 mm
ACIP# 460, CNH# 44/49, N# 575142
Tritartemorion – obverse
Tritartemorion – reverse
Tritartemorion
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 0.5 g • ⌀ 9.1 mm
ACIP# 463, CNH# 44/51, N# 575115

Denarius (first half of the 2nd century BC)

1 Denarius = 2 Quinarii = 10 Asses • 1 As = 2 Semisses = 4 Quadrantes = 6 Sextantes

⅛ Unit – obverse
⅛ Unit – reverse
⅛ Unit
(205 MÖ - 195 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 3.0 g • ⌀ 17.0 mm
ACIP# 1232, CNH# 176/3, N# 575131
Sextans – obverse
Sextans – reverse
Sextans
(195 MÖ - 170 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 4.8 g • ⌀ 20.0 mm
ACIP# 1240, CNH# 177/11, N# 575118
Sextans – obverse
Sextans – reverse
Sextans
(150 MÖ - 125 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 2.5 g • ⌀ 15.4 mm
ACIP# 1268, CNH# 179/28, N# 575104
¼ Unit – obverse
¼ Unit – reverse
¼ Unit
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 3.3 g • ⌀ 14.0 mm
ACIP# 1278, CNH# 181/46, N# 575109
¼ Unit – obverse
¼ Unit – reverse
¼ Unit
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 4.0 g • ⌀ 16.0 mm
ACIP# 1282, CNH# 182/50, N# 575113
¼ Unit – obverse
¼ Unit – reverse
¼ Unit
(205 MÖ - 195 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 5.0 g • ⌀ 21.2 mm
ACIP# 1231, CNH# 176/2, N# 575081
Quadrans – obverse
Quadrans – reverse
Quadrans
(195 MÖ - 170 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 6.1 g • ⌀ 20.6 mm
ACIP# 1239, CNH# 177/10, N# 575117
¼ Unit – obverse
¼ Unit – reverse
¼ Unit
(150 MÖ - 125 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 2.93 g • ⌀ 15 mm
ACIP# 1254, CNH# 179/25, FAB# 1468, Vives# 28/6, N# 382577
¼ Unit – obverse
¼ Unit – reverse
¼ Unit
(150 MÖ - 125 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 3.2 g • ⌀ 14.9 mm
ACIP# 1258, 1263, CNH# 180/32, N# 575102
Quadrans – obverse
Quadrans – reverse
Quadrans
(150 MÖ - 125 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 3.4 g • ⌀ 17.1 mm
ACIP# 1260, CNH# 179/27, N# 575101
½ Unit – obverse
½ Unit – reverse
½ Unit
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 8.1 g • ⌀ 21.8 mm
ACIP# 1274, CNH# 181/43, N# 575106
½ Unit – obverse
½ Unit – reverse
½ Unit
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 7.3 g • ⌀ 21.8 mm
ACIP# 1276, CNH# 181/45, N# 575107
½ Unit – obverse
½ Unit – reverse
½ Unit
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 6.0 g • ⌀ 19.4 mm
ACIP# 1277, CNH# –, N# 575108
½ Unit – obverse
½ Unit – reverse
½ Unit
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 5.3 g • ⌀ 18.3 mm
ACIP# 1279, CNH# 181/48, N# 575110
½ Unit – obverse
½ Unit – reverse
½ Unit
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 8.2 g • ⌀ 19.0 mm
ACIP# 1280, CNH# –, N# 575111
½ Unit – obverse
½ Unit – reverse
½ Unit
(218 MÖ - 206 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 5.1 g • ⌀ 17.8 mm
ACIP# 1281, CNH# 182/49, N# 575112
½ Unit – obverse
½ Unit – reverse
½ Unit
(205 MÖ - 195 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 10.6 g • ⌀ 26.0 mm
ACIP# 1230, CNH# 176/1, N# 575129
Semis – obverse
Semis – reverse
Semis
(195 MÖ - 170 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 13.7 g • ⌀ 26.2 mm
ACIP# 1237, CNH# 176/8, N# 575116
Semis – obverse
Semis – reverse
Semis
(195 MÖ - 170 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 11.9 g • ⌀ 24.9 mm
ACIP# 1238, CNH# 177/9, N# 575098
Semis – obverse
Semis – reverse
Semis
(170 MÖ - 150 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 9.2 g • ⌀ 24.1 mm
ACIP# 1250, CNH# 178/21, N# 575099
½ Unit – obverse
½ Unit – reverse
½ Unit
(150 MÖ - 125 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 5.8 g • ⌀ 20.5 mm
ACIP# 1252, 1253, CNH# 178/23, 179/24, N# 575100
½ Unit – obverse
½ Unit – reverse
½ Unit
(150 MÖ - 125 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 6.0 g • ⌀ 19.6 mm
ACIP# 1257, 1262, etc., CNH# 179/30, 179/31, N# 575122
Semis – obverse
Semis – reverse
Semis
(150 MÖ - 125 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 6.3 g • ⌀ 21.4 mm
ACIP# 1259, CNH# 179/26, N# 575121
½ Unit – obverse
½ Unit – reverse
½ Unit
(125 MÖ - 72 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 3.7 g • ⌀ 16.8 mm
ACIP# 1272, CNH# 181/42, N# 575105
As – obverse
As – reverse
As
(195 MÖ - 170 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 26.2 g • ⌀ 33.2 mm
ACIP# 1236, 1244, etc., CNH# 176/7, 177/15, etc., N# 292448
Unit – obverse
Unit – reverse
Unit
(195 MÖ - 170 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 10.1 g • ⌀ 24.5 mm
ACIP# 1246, 1247, CNH# 178/17, 178/18, N# 575126
As – obverse
As – reverse
As
(170 MÖ - 150 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 16.5 g • ⌀ 28.6 mm
ACIP# 1249, CNH# 178/20, N# 575119
As – obverse
As – reverse
As
(150 MÖ - 125 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 11.8 g • ⌀ 25.3 mm
ACIP# 1251, 1255, CNH# 178/22, 180/34, N# 414857
Unit – obverse
Unit – reverse
Unit
(150 MÖ - 125 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 11.9 g • ⌀ 26.1 mm
ACIP# 1261, 1264, CNH# 179/29, 180/36, N# 575130
Unit – obverse
Unit – reverse
Unit
(150 MÖ - 125 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 10.5 g • ⌀ 25.0 mm
ACIP# 1266, CNH# 180/35, N# 575103
Unit – obverse
Unit – reverse
Unit
(125 MÖ - 72 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 10.4 g • ⌀ 23.6 mm
ACIP# 1256, CNH# 180/33, N# 575120
Unit – obverse
Unit – reverse
Unit
(125 MÖ - 72 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 8.3 g • ⌀ 23.4 mm
ACIP# 1269, CNH# 180/38, N# 575123
Unit – obverse
Unit – reverse
Unit
(125 MÖ - 72 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 9.9 g
ACIP# 1270, CNH# 180/39, GCV# 21, Heiss# 15, N# 334623
Unit – obverse
Unit – reverse
Unit
(125 MÖ - 72 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 8.1 g • ⌀ 22.7 mm
ACIP# 1271, CNH# 181/40, N# 575128
Unit – obverse
Unit – reverse
Unit
(125 MÖ - 72 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Tunç • 7.0 g • ⌀ 21.9 mm
ACIP# 1273, CNH# 181/41, N# 575124
Quinarius – obverse
Quinarius – reverse
Quinarius
(195 MÖ - 170 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 1.9 g • ⌀ 15.1 mm
ACIP# 1235, CNH# 176/6, N# 575083
Denarius – obverse
Denarius – reverse
Denarius
(200 MÖ - 151 MÖ)
Madenî paralar › Standart tedavül madenî paralar
Gümüş • 3.8 g • ⌀ 19 mm
ACIP# 1233, CNH# –, N# 307578

Numista referees for this issuer:

An item is missing from the catalogue? Add it yourself! (İngilizce)