Hilfe bei der Erstellung bzw. Zusammenführung einer Serie [solved]

Hallo,

ich brauch mal Hilfe bei der Erstellung bzw. Zusammenführung einer Serie.

Die Firma Ferro Sanol Duodenal hattte mal eine Serie mit 20 Repliken aufgelegt, von denen ich 19 Repliken habe. Ich habe die fehlenden Stücke eingestellt und wollte die mit den bereits bestehenden Stücke zu einer Serie zusammenfassen, was mir offensichtlich misslungen ist.

Wenn ich eine Replik aufrufe, z.B. N#556299 und von dort aus die Serie aufrufe (in die Serie gehen will), wird mir nur eine Replik angezeigt, die zu der Serie gehört, was nicht richtig ist, da müssten 19 Stück (das 20. ist noch nicht eingestellt) erscheinen.

Jetzt habe ich gerade gesehen, dass wenn ich über die Suche im Katalog gehe und dort den Filter „Serie“ nutze, dass ich die Serie offensichtlich für jede Replik einzeln neu angelegt habe, was quatsch ist und so nicht gewollt war.

Was habe ich falsch gemacht und wie krieg ich das bereinigt? 

Meine Vorstellung war, dass wenn man eine Replik aus der Serie aufgerufen hat, aus dieser dann zu der Gesamtserie springen kann.

Vielen Dank vorab

Ich spreche kein Deutsch.

The problem is that there are 14 series with the same name, probably created one for each medals.

https://en.numista.com/catalogue/series.php?id=12313
https://en.numista.com/catalogue/series.php?id=12259
https://en.numista.com/catalogue/series.php?id=12260
https://en.numista.com/catalogue/series.php?id=12293
https://en.numista.com/catalogue/series.php?id=12300

https://en.numista.com/catalogue/series.php?id=12302
https://en.numista.com/catalogue/series.php?id=12303
https://en.numista.com/catalogue/series.php?id=12304
https://en.numista.com/catalogue/series.php?id=12305
https://en.numista.com/catalogue/series.php?id=12306

https://en.numista.com/catalogue/series.php?id=12314
https://en.numista.com/catalogue/series.php?id=12315
https://en.numista.com/catalogue/series.php?id=12316
https://en.numista.com/catalogue/series.php?id=12317
 

I will send modification request for fix it.

I submitted the modification requests. Now we have to wait for the referee to accept them.

I think the problem was that each replica and its series were created in the issuer of the original coins (the referee should not have accepted them), so we have a series for each issuer. Later, the replicas were moved to the right issuer (Germany), but the series remained in their original issuer.

If you know the original coin of each replica, you can contribute adding the link to the page of the original coin in the page of its replica.

Thank you very much for correcting this. 

In fact, I had entered them all under the country of the original issue, without knowing that for replicas, the country of manufacture of the replica should be used. The referee pointed this out and it was changed accordingly before approval was given. But by then, the information about the series had probably already been entered under the country.

 
I also corrected this for two items that I did not create.  

https://de.numista.com/catalogue/contributions/voir_demande.php?id=14853739

https://de.numista.com/catalogue/contributions/voir_demande.php?id=14853738

However, these are still awaiting approval by the referee.

I am familiar with this original coins, listed also on Numista. I will add the links, but I think it is better to wait until my incorrect entries have been corrected first.

car-nev

I will add the links, but I think it is better to wait until my incorrect entries have been corrected first.

This not need wait, you can do now. If two request in the same page do not affect to the same fields, there is no problem https://en.numista.com/forum/topic131979.html (I modified only the series, and the demonetised field to unknown: a replica never was monetised). Also, I wrote in sources a link to this topic, so that the referee is aware of it.
 

All requests sent to the referee of Germany were accepted. The series is https://en.numista.com/catalogue/series.php?id=12261

There are two pending requests sent to referees of the Roman Republic and the Roman Empire (in these requests I changed also the issuer to Germany).

I published a request to delete the duplicate series: https://en.numista.com/forum/topic173293.html

davidhs

There are two pending requests sent to referees of the Roman Republic and the Roman Empire (in these requests I changed also the issuer to Germany).

Done.

If I understand correctly, two replicas are still listed under the Byzantine Empire / series https://en.numista.com/catalogue/series.php?id=12296  The incorrectly entered issuing country has already been corrected to Germany. 

These two replicas still need to be assigned to series https://en.numista.com/catalogue/series.php?id=12261

Then all 19 issues will be in the right place.

Can this still be changed?

Many thanks in advance.

My modification requests were validated but I forgot the two replicas of https://en.numista.com/catalogue/series.php?id=12296 (I did not request move to Germany, they were moved before).

I sent now modification requests to correct the series of that two replicas.

davidhs

I sent now modification requests to correct the series of that two replicas.

Done. All replicas (19) are in the series https://en.numista.com/catalogue/series.php?id=12261

Great, perfect in my opinion.
Many thanks to everyone involved.